All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 93 of 120
As soon as a user button assigned to Target A, B, C or M has been pressed, autofocus
will be activated. Focus control will remain on the manual focus controller (e.g. focus
knob) until the controller assigned to the ramp axis (e.g. slider) is physically moved from
one end stop to the other. On the rangefinder main screen, the selected target will be
highlighted using the target direction indicator and the manual ramp will be visualized.
After the ramp has finished, the target will continue to be tracked.
In contrast to the time and speed ramps, the manual ramp can be reversed by simply
moving the assigned controller (e.g.slider) in the opposite direction back to its starting
position.
Pressing another target user button will change the target*. But, the ramp will still be
controlled manually by the assigned controller.
The manual ramp mode can be quit by turning the autofocus off (e.g. AF toggle). A
manual ramp towards the focus controller (Target M) allows full manual focus control at
any time. Please also refer to section “6.2.3.7.5.4. Manual mode” on page 91 in this
manual.
* available with compatible rangefinders offering more than one target
6.2.3.7.6.
AF Ramp time
The AF ramp time menu allows you to set a ramp time between 0.1 and 5 seconds. This
is the predetermined time that the focus will shift automatically from one target to the
other when ramp time is active. Use the thumb wheel to increase or decrease the ramp
time. Press select to confirm your speed settings.
6.2.3.7.7.
AF Ramp speed
The AF ramp speed menu allows you to set a ramp speed between 0.1 and 1.5 m/s.
This is the predetermined speed that the focus will shift automatically from one target to
the other when ramp speed is active. Use the thumb wheel to increase or decrease the
ramp time. Press select to confirm your speed settings.
6.2.3.7.8.
Laser pointer
The laser pointer menu allows you to turn the rangefinder’s laser pointer on or off. When
the laser pointer is turned on, it will remain active for 30 seconds before turning off
automatically. During this time, you can turn it off manually by selecting “off“.
Note: The laser pointer icon in the rangefinder main screen turns green if the laser pointer is
on. If the laser pointer is off it illuminates white.
Note: The laser pointer can be activated through a cPRO / cPRO PLUS or cPRO ONE hand
unit user buttons as well. This allows the laser to remain active as long as the user button is
being pressed. (For further information, please refer to section “6.2.3.8. BUTTONS” on page
Note: All laser pointer functions are available with cmotion cfinder III only.