All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 20 of 120
5.2.3.2. Slider illumination and status LEDs
The slider scale can be illuminated individually through the “Slider brightness” menu. The
status LEDs for the slider are incorporated in the scale illumination and provide direct
feedback for the slider axis.
LED status
Meaning
off
no axis assigned to slider / slider illumina-
tion off
solid white
motor ready, no warnings /slider illumina-
tion on
green/yellow flashing
calibration request
yellow flashing
motor calibration
solid yellow
calibration time out
solid red
slider locked / no motor control / AF
red flashing
no motor connected
5.2.4.
Joystick
(cPRO / cPRO PLUS hand unit feature only, not available for cPRO ONE hand unit)
1
Joystick
2
Position indicator display
3
Joystick status LED
The joystick is a control interface with a relative position encoder. Press the joystick up or
down to control the assigned axis. The joystick´s touch sensitivity and the axis speed can be
adjusted individually in the “Joystick menu” (please refer to section “6.2.3.2.3. Joystick” on
page 52 in this manual). As default, the joystick is assigned to zoom.
5.2.4.1. Position indicator display
The position indicator display consits of 10 blue single LEDs. It indicates the relative
position of the assigned axis in %. If the display is off, the motor is at one end stop of the
lens (= < 10%). If the display is fully illuminated the motor is at the other end stop of the
lens 100%. The joystick position indicator display can be illuminated individually through
the “Joystick brightness” menu. As default, the joystick is assigned to zoom.
2
1
3