All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 53 of 120
6.2.3.2.3.4. Lock
The lock menu allows you to lock the joystick (e.g. if shooting with a locked off camera).
A small red lock will be displayed in the status bar on all main screens. The letter “J” for
joystick will illuminate each time you touch the joystick. The status LED of the joystick will
start flashing red, indicating that the joystick is locked and no motor control is possible.
6.2.3.2.4.
Thumb wheel
The thumb wheel menu contains all settings related to the thumb wheel control interface
and consists of:
Control (status)
Motor direction
Menu direction
Axis ratio (status)
Lock (status)
6.2.3.2.4.1. Control
The control menu allows you to assign the axis you want to control (Focus / Iris / Zoom
/ Filter / Aux / AF ramp / Off) to the thumb wheel. If you select Off, the thumb wheel will
have no control over any axis but will be available for regular menu navigation.
Note: If the thumb wheel is assigned to control a motor, press and hold MB2 and move
the thumb wheel to navigate between the main screens. As an alternative, you can also
swipe the touch screen left or right.
6.2.3.2.4.2. Motor direction
The motor direction menu allows you to assign the thumb wheel to control an assigned
motor to clockwise or counter-clockwise. This feature allows you to set your motor control
preferences independent of the thumb wheel control in the menu navigation (please also
refer to “6.2.3.2.4.3. Menu direction” on page 53 in this manual).
6.2.3.2.4.3. Menu direction
The menu direction allows you to assign the direction of the thumb wheel to clockwise or
counter-clockwise.
Using the clockwise setting you navigate up in the adjustment menu if moving the thumb
wheel clockwise. Using the counter-clockwise setting you navigate up in the adjustment
menu if moving the thumb wheel counter-clockwise.