manualshive.com logo in svg

cmotion cPRO, Руководство пользователя, Страница: 13 / 120

Поделиться
Скачать
cmotion cPRO Скачать руководство пользователя страница 13

All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 13 of 120

4.  Introduction

        cPRO PLUS hand unit  

    cPRO hand unit   

     cPRO ONE hand unit

The cPRO / cPRO PLUS hand unit is a 3-4 axis wireless hand-held control device for the cPRO 

lens control system. The cPRO ONE is a 1-2 axis wireless hand-held control device. All 3 have 

the red-coded cmotion radio module and share the same user interface, functions and features.

With their user friendly and intuitive interface, the cPRO 

/ cPRO PLUS

 and cPRO ONE hand 

units are lightweight and set new standards in both design and ergonomics.

The focus knob offers an ergonomic grip with a fingertip concave mold and mechanical hard 

stops.

9 user buttons on the cPRO PLUS and 6 user buttons on the cPRO and cPRO ONE provide 

quick access to cPRO’s extensive features. Illuminated key elements (focus marker ring, iris 

slider strip and buttons) offer controllable ambient lighting for bright or dark environments. 

The capacative touch display shows live lens and camera information.

The asymmetrical design and comfort grip keeps the hand unit balanced in your hand. Several 

well positioned mounting points provide options for third party accessories including quick 

release mounts, monitors, etc.

Up to three cPRO 

/ cPRO PLUS

 or cPRO ONE hand units can connect to a cPRO motor / 

cPRO camin wirelessly for split focus, iris and zoom operation. Real-time lens data is available 

when used with the cPRO motor / cPRO camin.

Using the LBUS interface, the cPRO / cPRO PLUS or cPRO ONE hand unit can be hard-wired 

with up to four additional cforce motors and other ARRI / cmotion control units including the 

pan-bar / steady zoom, ARRI LCUBE-1, LCUBE-2, ARRI Master Grips or cfinder III.

Содержание cPRO

























































































































Отзывы:

Нет отзывов