manualshive.com logo in svg

cmotion cPRO, Руководство пользователя, Страница: 71 / 120

Поделиться
Скачать
cmotion cPRO Скачать руководство пользователя страница 71

All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 71 of 120

6.2.3.3.13. 

Set iris

The set iris menu allows you to enter a fixed iris value if motor is not assigned to the iris 

scale. This allow a valid depth of field (DOF) to be calculated with the variable data that 

is available.

Note: A lens file needs to be loaded. Set iris uses a fixed iris value when the axis is not 

motorized. This value needs to be changed each time the iris is changed on the lens.

6.2.3.3.14. 

Set zoom

The set zoom menu allows you to enter a fixed zoom value if motor is not assigned to the 

zoom scale. This allow a valid depth of field (DOF) to be calculated with the variable data 

that is available.

Note: A lens file needs to be loaded. Set zoom uses a fixed zoom value when the axis is not 

motorized. This value needs to be changed each time the zoom is changed on the lens.

6.2.3.3.15. 

Circle of confusion

The circle of confusion menu allows you to enter a value depending on your cameras 

sensor size and image format to calculate an accurate depth of field based on variable 

lens data.

Note: A lens file needs to be loaded. This value needs to be set before shooting with a new 

camera. For the correct circle of confusion value for your camera, please refer to the camera 

manual or contact the camera manufacturer.

6.2.3.3.16. 

Sync cam data

The Sync cam data feature allows you to:

1. Upload ARRI LDS and Cooke /i data from a corresponding lens to your cPRO / cPRO 

PLUS / cPRO ONE hand unit automatically (compatible with ARRI cameras only). 

2. Feed FIZ metadata for any lens from the cPRO LCS to selected cameras (compatible 

with ARRI Alexa Mini/ Mini LF, ARRI Amira, RED and Sony Venice).

Turn sync cam data “on” if you want to load lens data from ARRI cameras automatically, 

or if you want to feed FIZ metadata to a compatible camera. If you do not want to use this 

feature, ensure sync cam data is set to “off”. 

Note: The sync camera data feature requires a DATA license key. Please also refer to section 

“6.2.3.9.4. Licenses” on page 101 in this manual.

Содержание cPRO

























































































































Отзывы:

Нет отзывов