All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 64 of 120
Move the control interface assigned to zoom (joystick as default) until the datum line on
your lens matches the desired focal length.
Use the thumb wheel to scroll clockwise or counter-clockwise until you see the
corresponding numeric value in the blue input box. As an alternative, you can also swipe
the touch screen up or down.
Once the desired value is highlighted in the blue input box, press “set” (MB2) and the
value mark will be set on the grafical scale bar. As an alternative, you can also tap the
touch screen to confirm your selection or press the back button (BB1).
Move the control interface to the next value on your lens.
If you move the lens from the last set value in one direction, the lens wizard will predict
the next value.
If the predicted value is not a value marked on your lens, use the thumb wheel to scroll
clockwise or counter-clockwise until you see the desired value in the blue input box. As
an alternative, you can also swipe the touch screen up or down.
Once the desired value is highlighted in the blue input box, press “set” (MB2) and the
value mark will be set on the grafical scale bar. As an alternative, you can also tap the
touch screen to confirm your selection or press the back button (BB1).
Continue this procedure until you have set all important values on your lens.
Note: It is not necessary to assign every single lens value because the cPRO system will
predict missing values automatically. However, to achieve the best matching lens data, it is
recommended to input and assign as many values as possible using this procedure
If a lens value is not displayed in the predicted list, press UB3 to change the resolution of
the input box. This allows you to enter any value. The text “UB3:resolution” will illuminate
green while the high resolution remains active. Press UB3 again to return to the original
resolution.