manualshive.com logo in svg

cmotion cPRO, Руководство пользователя, Страница: 18 / 120

Поделиться
Скачать
cmotion cPRO Скачать руководство пользователя страница 18

All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 18 of 120

5.2.2.3.  Pre-marked focus rings

K2.0019834  cPRO  pre-marked  focus 

ring imperial set

 

      

K2.0019835  cPRO  pre-marked  focus 

ring metric set

In order to save time marking your focus rings for each lens, the cPRO / cPRO PLUS and 

cPRO ONE hand units are compatible with five imperial and five metric pre-marked rings. 

Each ring is engraved with a scale from infinity to one of five close focus values and can 

be used with a wide range of lenses from wide angle to telelphoto. For more information 

please refer to section “6.2.3.2.1.4. Pre-marked rings” on page 49 in this manual.

5.2.2.4.  Datum line

The datum line is the reference mark on the knob. It illuminates with the knob scale  

illumination. Its brightness can be controlled in the “Knob brightness” menu.

5.2.2.5.  Knob illumination and status LEDs

The knob scale can be illuminated individually through the “Knob brightness” menu. 

The status LEDs for the knob are built into the scale illumination, which gives you direct 

feedback of the status for the knob axis.

LED status

Meaning

off

no axis assigned to knob / knob illumina-

tion off

solid white

motor  ready,  no  warnings  /knob  illumina-

tion on

green/yellow flashing

calibration request

yellow flashing

motor calibration

solid yellow

calibration time out

solid red

knob locked / no motor control / AF

red flashing

no motor connected

Содержание cPRO

























































































































Отзывы:

Нет отзывов