manualshive.com logo in svg

cmotion cPRO, Руководство пользователя, Страница: 81 / 120

Поделиться
Скачать
cmotion cPRO Скачать руководство пользователя страница 81

All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 81 of 120

NOTICE

The lens motors must be recalibrated under the following conditions:

- When a motor is detached from the lens

- After changing motors

- After changing lenses

- After a change in a motor position while powered down

NOTICE

Omitting motor calibration might lead to damage of the lens due to the high level of motor 

torque!

CAUTION!

Risk of injury! Do not touch the motor gear while motor is moving!
This device is not intended for use by children. Keep body parts out of the motion path.

Disconnect the plug if the device is not used for a longer period of time.
IEC 60417-6056 (2011-05) for other moving parts

6.2.3.4.3. 

Stealth mode

The  stealth  mode  menu  can  activate  and  deactivate  the  cPRO’s  stealth  mode. When 

stealth mode is on, the illumination of all LBUS connected cforce motors will be turned off 

(e.g. if the camera angle is critical because of camera reflection in the picture).

Содержание cPRO

























































































































Отзывы:

Нет отзывов