manualshive.com logo in svg

cmotion cPRO, Руководство пользователя, Страница: 82 / 120

Поделиться
Скачать
cmotion cPRO Скачать руководство пользователя страница 82

All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 82 of 120

6.2.3.5.  FILTER (for Cinefade VariND only)

The cmotion Cinefade VariND consists of a motorised rotating polariser and a static 

polariser which together form a variable ND filter. The filter menu is only visible when 

a cmotion Cinefade VariND filter is detected in the LBUS daisy chain. The filter menu 

contains all settings related to the use of a cmotion Cinefade VariND filter. 

These consists of:

Filter Mode

Optical safe range

NOTICE

For detailed instructions on how to use the cmotion Cinefade VariND, please refer to the  

cmotion Cinefade VariND user guide.

6.2.3.5.1. 

Filter Mode

The filter mode menu allows you to select between the different operation modes of the 

Cinefade filter. These are:

VariND mode

RotaPola mode

Cinefade mode

NOTICE

A  cPRO  lens  control  system  is  required  for    remote  variable  ND  control,  remote  variable 

polariser control and the variable depth of field effect (Cinefade).

6.2.3.5.1.1.  VariND mode

In VariND mode, the filter can be used either standalone or controlled remotely through a 

cPRO / cPRO PLUS or cPRO ONE hand unit. In standalone mode, the integrated but-

tons allow precise control over the ND gradient between ND0.4 and ND2.8. This helps 

save time and effort when compared with changing traditional ND filters. In wireless 

mode, the cPRO / cPRO PLUS or cPRO ONE hand unit can be used to achieve smooth 

dynamic INT to EXT transitions as well as fast, precise exposure changes whenever the 

camera is inaccessible.

6.2.3.5.1.2.  RotaPola mode

In  RotaPola  mode,  the  filter  can  be  rotated  by  180°  either  standalone  or  controlled 

remotely through a cPRO / cPRO PLUS or cPRO ONE hand unit. In standalone mode, 

the  integrated  buttons  allow  precise  control  over  the  rotation  of  the  filter  to  eliminate 

polarisation issues including reflections and glare. In wireless mode, the cPRO / cPRO 

PLUS or cPRO ONE hand unit can be used creatively to achieve dynamic polarisation 

changes on surfaces such as car bodywork and glass.

Содержание cPRO

























































































































Отзывы:

Нет отзывов