All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 45 of 120
The cPRO hand unit can save up to 5 user profiles within its internal memory. However,
additional profiles can be saved to and loaded from a USB when connected to the hand
unit.
Note: User profiles will be deleted from the internal memory when performing a factory reset.
It is therefore recommended to save user profiles to a USB before performing this process.
6.2.3.1.8.1. Load
To load a user profile from either the cPRO hand unit´s internal memory or a USB drive, go
to “Load”, select the user profile you want to load, and confirm by pressing “load” (MB2).
User profiles stored on a USB drive will be listed below “<-- USB profiles -->”.
After confirming your chosen user profile (pressing MB2 “load”) the cPRO hand unit will
automatically restart.
6.2.3.1.8.2. Save
In order to save a user profile to the cPRO hand unit´s internal memory, go to “Save” and
select one of the 5 slots using the thumb wheel. If you want to overwrite an existing slot,
press MB2 “save”. A pop up menu will ask you to confirm “Do you really want to overwrite
existing profile?”. Press MB3 “save” if you do want to overwrite the existing user profile,
or press MB1 “back” if you want to select a different slot.
Empty slots are marked by <no name>. Both empty slots and existing user profiles can be
named by pressing MB3 “name”. To create a profile name, scroll through the alphanumeric
characters using the thumb wheel or touch screen. A minimum of two characters are
required to save a user profile’s name.
Once the desired letter (or number) is highlighted in blue, press “select” (MB2) to set that
character. As an alternative, you can also tap the touch screen to confirm your selection.