cmotion cPRO Скачать руководство пользователя страница 49

Страница: 49 / 120

http://www.cmotion.eu

page 49 of 120

Control limits: This function limits the travel of the knob at two predefined marks while

maintaining the full rotation of the lens. E.g. for long but quick focus pulls.

Setup: Select the desired limit function in the knob limits menu. Assign a user button to

“Knob limits set”. Move the knob to the first focus mark. Press and hold the user button

assigned to “Knob limits set” and move the knob to the second focus mark. Release

the user button at the second focus mark. The selected limit function will be applied

automatically. In order to deactivate the limit function and to return to regular knob control,

press the user button assigned to “Knob limits set” again. A pop up menu indicates the

status of the limit functions being activated or deactivated.

Note: If you change the limit mode while a limit is active, the limits will be deactivated

automatically. You will then need to set a new limit range.

Note: Pre-marked focus rings do not work with knob limits.

Also, individually marked focus rings will not match the scales while these limit functions are

activated.

6.2.3.2.1.4. Pre-marked rings

The pre-marked rings menu allows you to select one of five imperial and five metric pre-

marked focus rings. Each ring is engraved with a scale from infinity to one of five close

focus values. Pre-marked focus rings can be used with a wide range of lenses from wide

angle to telelphoto and save time marking a focus marker ring for each lens.

Pre-marked focus rings are available in imperial or metric scales:

8”

0,20m

12”

0,25m

14”

0,35m

20”

0,5m

3´6”

Note: Before pre-marked focus rings can be used, a lens file needs to be created using the

cPRO / cPRO PLUS / cPRO ONE hand unit´s internal ‘create lens’ feature or a cworld.

In order to use a pre-marked focus rings, please proceed as follows:

•

Calibrate the lens

•

Load the corresponding lens file from the cPRO / cPRO PLUS / cPRO ONE hand

unit or cworld

•

Choose the right pre-marked focus ring to match the close focus value of your

lens

•

Enter the pre-marked rings menu and select the appropriate marker ring from the

list

Содержание cPRO

























































































































Результаты поиска

Содержание cPRO

Отзывы:

cmotion cPRO, Руководство пользователя, Страница: 49 / 120

Результаты поиска

Содержание cPRO

Отзывы: