manualshive.com logo in svg

cmotion cPRO, Руководство пользователя, Страница: 51 / 120

Поделиться
Скачать
cmotion cPRO Скачать руководство пользователя страница 51

All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 51 of 120

Control limits: This function limits the travel of the slider at two predefined marks while 

maintaining the full rotation of the lens. E.g. for quick iris racks.

Setup: Select the desired limit function in the slider limits menu. Assign a user button to 

“Slider limits set”. Move the slider to the first iris mark. Press and hold the user button 

assigned to “Slider limits set” and move the slider to the second iris mark. Release the user 

button at the second iris mark. The selected limit function will be applied automatically. In 

order to deactivate the limit function and to return to regular slider control, press the user 

button assigned to “Slider limits set” again. A pop up menu indicates the status of the 

limit functions being activated or deactivated.

Note:  If  you  change  the  limit  mode  while  a  limit  is  active,  the  limits  will  be  deactivated 

automatically. You will then need to set a new limit range.

Note: Pre-marked iris strips do not work with slider limits.   

 

 

  

Also, individually marked iris strips will not match the scales while these limit functions are 

activated.

6.2.3.2.2.3.  Pre-marked strips

The pre-marked strips menu allows you to select one of three pre-marked iris strips. Each 

strip is engraved with a scale from close or 22 to one of 3 open iris values. Pre-marked 

iris strips can be used with a wide range of lenses and save time marking an iris strip for 

each lens.

Pre-marked iris strips are available with the following T-stop scales:

close - 1.0

22 - 2.0

22 - 2.8

Note: Before pre-marked iris strips can be used, a lens file needs to be created using the 

cPRO hand unit´s internal ‘create lens’ feature or a cworld.

In order to use a pre-marked iris strips please proceed as follows:

•  

Calibrate the lens motors

•  

Load the corresponding lens file from the cPRO hand unit or cworld

•  

Choose the right pre-marked iris strip to match the open iris value of your lens

•  

Enter the pre-marked strips menu and select the appropriate marker strip from the 

list

Содержание cPRO

























































































































Отзывы:

Нет отзывов