All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 69 of 120
6.2.3.3.9.
Import ARRI lens
The import ARRI lens menu allows you to import lens files (.tap) created with an ARRI
WCU-4 or downloaded from an archive site and save to a cPRO / cPRO PLUS or cPRO
ONE hand unit’s internal memory.
Note: In order to import lens files (.tap), a USB stick formated in ExFAT or FAT32 loaded
with the appropriate lens files needs to be inserted in the USB slot on the back side of the
cPRO / cPRO PLUS or cPRO ONE hand unit. The USB drive will be recognized and mounted
automatically. The “Import ARRI lens” feature requires a DATA license key. Please also refer
to section “6.2.3.9.4. Licenses” on page 101 in this manual.
Note: It is NOT possible to sort lens files or display advanced lens information when using
the Import ARRI lens menu.
A selected lens file from the dynamic list (MB2) will turn green. You can select or unselect
multiple lens files one after another or select and unselect all. Press import (MB3) in
order to import the selected lens files. The lens files will be imported without further
confirmation required.
Note: In order to prevent lens files which have the same name to be overwritten, only lens
files which are not yet stored on the cPRO / cPRO PLUS or cPRO ONE hand unit’s internal
memory will be imported.
6.2.3.3.10.
Export to USB
The export to USB menu allows you to export lens files (.cml) from the cPRO / cPRO
PLUS or cPRO ONE hand unit’s internal memory.
Note: In order to export lens files (.cml), a USB stick formated in ExFAT or FAT32 needs to
be inserted in the USB slot on the back side of the cPRO / cPRO PLUS or cPRO ONE hand
unit. The USB drive will be recognized and mounted automatically.
To help find the correct lens file quickly, UB2 allows you to change the display order of
your lens files using the following categories:
•
custom text, the name which was assigned to each lens file when it was created.
•
focal length or zoom range, the focal length or zoom range which was assigned
to each lens file when it was created.
•
T-stop, the open T-stop which was assigned to each lens file when it was created.
UB3 allows you to activate and deactivate advanced lens information. This will display
information about your lens file including manufacturer, serial number, weather the file
was created from a duplicate file, whether it was created as a metric or imperial lens, and
whether it is selected as one of your “favorites”. While viewing advanced lens information,
you can use the thumb wheel to scroll through the lens files.
Press select (MB2) and the selected lens file will turn green. You can select or unselect
multiple lens files one after another or select and unselect all. Press export in order to
export the selected lens files. The lens files will be exported without further confirmation
required.
Note: If a lens file with the same name already exist on the USB drive, a counter will be
added to the lens file name, e.g. (1).