manualshive.com logo in svg

cmotion cPRO, Руководство пользователя, Страница: 42 / 120

Поделиться
Скачать
cmotion cPRO Скачать руководство пользователя страница 42

All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 42 of 120

6.2.3.1.3. 

Brightness

The  brightness  menu  allows  you  to  individually  adjust  the  brightness  level  on  several 

main components of the cPRO / cPRO PLUS and cPRO ONE hand unit. It also includes 

functions including auto brightness and auto activate.

The brightness menu consits of the following functions:

Auto activate (status)

Auto brightness (status)

Display brightness

Keypad brightness

Knob brightness

Slider brightness*

Joystick brightness*

 

* cPRO / cPRO PLUS hand unit feature only, not available for cPRO ONE hand unit

6.2.3.1.3.1.  Auto activate

The auto activate function can be turned on or off. If turned on, the cPRO / cPRO PLUS 

/ cPRO ONE hand unit´s illumination will turn off if the light sensor is exposed to a light 

source.  If  it  gets  darker,  the  illumination  will  switch  on  to  the  pre-defined  brightness 

settings again (e.g if you are shooting outside and you have to enter a dark building). If 

turned off, the previous brightness settings will be activated.

6.2.3.1.3.2.  Auto brightness

The auto brightness function can be turned on or off. If turned on, the cPRO / cPRO 

PLUS / cPRO ONE hand unit´s illumination will adjust dynamically to produce the best 

contrast for the environmental lighting. If turned off, the previous brightness settings will 

be activated.

6.2.3.1.3.3.  Display brightness

The display menu allows you to adjust the brightness of the touch display individually. 

Use the thumb wheel to turn the brightness up or down. Press select to confirm your 

brightness settings.

6.2.3.1.3.4.  Keypad brightness

The  keypad  brightness  menu  allows  you  to  adjust  the  brightness  of  the  illuminated 

buttons collectively. Use the thumb wheel to turn the brightness up or down. Press select 

to confirm your brightness settings.

6.2.3.1.3.5.  Knob brightness

The knob brightness menu allows you to adjust the brightness of the focus ring illumination 

individually. Use the thumb wheel to turn the brightness up or down. Press select to 

confirm your brightness settings

Содержание cPRO

























































































































Отзывы:

Нет отзывов