Club Car IQ PLUS 2008, Дополнение к руководству по обслуживанию и ремонту

Страница: 78 / 164

IQ DISPLAY MODULE (IQDM) SERIES 2 AND IQDM-P DIAGNOSTICS Faults Menu
Page 12-16 2008-2011 IQ Plus Electric Vehicle Maintenance and Service Supplement
12
6. Select settings .
7. Select write settings to controller .
8. Press + on the change value button to confirm the operation.
9. The handset will display an “executing...” message for the next few seconds while the controller settings
are being stored in the handset’s memory (Figure 12-3) .
10. When the handset is finished transferring the speed controller settings, a confirmation message is dis-
played (Figure 12-5) .
11. Repeat this procedure for additional vehicles that need to be programmed with the same handset set-
tings.
Figure 12-5 Confirmation Message Figure 12-6 Confirmation Message
2
1
3
All Controller Settings
Set from Programmer.
OK (+) OK (+)
2
1
3
All Controller Settings
Reset to Original Values.
OK (+) OK (+)