EXTender 1100A Switch and Remote Module System Administrator’s
Guide
43
Recommended Connect Parameters – User ID
There is one more Recommend connect parameter to configure. The User ID is required
for all 1100A connections. The default Remote User ID is not configured so on each
connection the user would be prompted to enter the desired User ID. If the User ID is
configured then the remote User will not be prompted each connection. The User ID can
be configured using the Setup Wizard or the MC.
Path:
Remote->Utilities->Setup_Wizard
Path:
Remote->Configuration->Port
You can also configure Modem setting using the TMI
TMI Path:
(Remote Only)->Set Config->Connect Menu-> User ID
Figure 18: Remote Module – Port Configuration Screen
5. Setting
the
User ID.
A User ID “maps” a specific port on the Remote Module to a
specific port on the Switch Module. When connecting to the 1100A Switch you require
a User ID. The default ID is 1 (representing the port number). This feature is also
typically used when connecting to one of Citel’s multi-user devices such as a
PBXgateway. If this remote is connecting to a multi-user device refer to the
System
Administrator’s Guide
of the PBXgateway for more information.
T
HE
E
SSENTIAL
C
ONFIGURATION
P
ARAMETERS FOR THE
R
EMOTE
M
ODULE
A
RE
N
OW
C
OMPLETE
.
P
LEASE
T
EST THE
C
URRENT
C
ONFIGURATION BY
M
AKING A FEW
“T
EST
”
P
HONE
C
ALLS
P
RIOR TO
G
OING ON TO THE
A
DVANCED
C
ONFIGURATION
S
ECTION
.
Document Number: M-1100A-MUC
Version: Rev AG
© Copyright 2008 Citel plc All Rights Reserved
