manualshive.com logo in svg

Citel EXTender 1100, Руководство системного администратора

Поделиться
Скачать
Citel EXTender 1100 Скачать руководство пользователя страница 13

EXTender 1100A          Switch and Remote Module System Administrator’s

 Guide 

13

2 P

LANNING AND 

P

REREQUISITES

 

You should read the information in this chapter before starting the installation process as 
you may need to obtain some information or make some changes that could be difficult 
when on site. 

Do NOT connect the Switch Module to the PBX or connect the digital telephone to 
the Remote Module until the Setup Wizard has been run. An improperly configured 
Switch Module can disable or damage the PBX line card and an improperly 
configured Remote Module can cause damage to the digital telephone set. 

!

You Need to Check 

1.  Which model of PBX is used at the corporate site 

2.  Which digital telephones at the remote location will be communicating with the Switch 

Module ports 

3.  Where the Switch Module and Remote Module will be physically located 

4.  Access to the power to be supplied to the Switch Module and Remote Module 

5.  The Switch Module (at the corporate site) and the Remote Module (at the branch 

office) must be installed properly and the PSTN lines for both devices must be 
operational 

a)  A functioning analog line must be connected to the Switch Module 

b)  A functioning analog line must be connected to the Remote Module 

6. Power 

and 

Wiring 

a)  The system is designed to operate at 120-240V AC. Do not apply power to the 

Switch Module or Remote Module until you are instructed to do so in the 
installation procedure. 

b)  Install the Switch Module or Remote Module power supply and cabling away from 

high power/high RF noise devices such as computers, fans, fluorescent ballasts 
and power supplies 

c)  Use good wiring practices. Do not run wires over fluorescent lights, computers, air 

conditioners, etc., as this can introduce noise. 

d)  The distance between the Switch Module and the PBX it is to be connected to 

should not exceed 500 feet (150 meters) 

e)  Ensure that the power supply is within 5 feet (1.5 meters) of the Switch Module 

and the Remote Module 

Document Number: M-1100A-MUC 

Version: Rev AG

 

© Copyright 2008 Citel plc All Rights Reserved

 

 

Содержание EXTender 1100









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды