EXTender 1100A Switch and Remote Module System Administrator’s
Guide
27
Remote Module Telephone Management Interface
The Telephone Management Interface (TMI) can also be used for setting the configuration
parameters for the 1100A Remote Module using a digital telephone with a display. For
ease of use it is recommended that a telephone with a two-line display be utilized for any
telephone MI programming.
You must set the PBX type, in the Console Setup Wizard, before being able to use the
Remote Module TMI.
Below is a summary of the TMI Menu structure:
Set Configuration
à
Connect Menu
à
Modem Menu
à
IP Menu
à
Console baud
à
Country Code
à
Connect Parameters
View Configuration Info
à
Connect Info
à
IP Info
View System Info
Diagnostics Info
à
View Diagnostics
à
Initialize Modem
Restart Unit
Accessing the Phone Telephone Management Interface
Press the “Hold” key on the telephone four times. This can be done while offline or online
(Extended)
Menu
Legend
Navigating through the telephone interface menus is done using the keypad on the
telephone or soft menu keys below the LCD display (if the telephone is equipped with Soft
menu keys). The menu legend shows each applicable numeric key and the screen or
command to which it corresponds in the interface.
Prv/Prev
=
1
(left most soft key) on the telephone keypad:
Previous Screen
Ok
=
2
(middle soft key) on the telephone keypad:
Accept changes/enter
menu
Nxt/Next
=
3
(right most soft key) on the telephone keypad:
Next Screen
Document Number: M-1100A-MUC
Version: Rev AG
© Copyright 2008 Citel plc All Rights Reserved
