D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
52
Cisco Webex DX70 and DX80
Administrator Guide
You have access to device information, and some basic
configurations and device tests on the device’s user interface.
Device-critical settings and functions, such as network settings,
service activation, and factory reset, may be protected by a
passphrase, refer to the
Restrict the access to the Settings
chapter.
Some of the settings and tests are also part of the
Setup assistant
that is launched when the device is powered up for the first time.
The Setup assistant is described in the
Getting Started Guide
for
devices running CE software.
How to administer the video conferencing device (page 4 of 4)
Settings and device information on the user interface
Access Settings
1. Select the device name or address at the top of the user
interface.
2. Select
Settings
.
A padlock symbol indicates that a setting is protected
(locked down).
3. Select the setting you want to change, or the test you want to
run.
If a setting is locked down, an authentication window pops up,
and you have to sign in with ADMIN credentials to proceed.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices
Introduction
