Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Initial System Configuration
Cisco SCE 1000 2xGBE Installation and Configuration Guide
5-14
OL-7821-05
To create the access control lists, complete the following steps:
Step 1
Enter the Access Control Lists configuration menu.
Would you like to enter the Access lists configuration menu? [no]:
y
Type
y
and press
Enter
.
The Access Control Lists configuration dialog begins.
Step 2
You have the option of creating or modifying Access Control Lists, or skipping this section and
proceeding directly to assign the existing ACLs to the desired management interfaces.
Would you like to create new Access lists or modify existing lists? [no]:
y
If you choose not to create or edit Access Control Lists, skip to
Step 9: Configuring the Topology-
Dependent Parameters
(on page
5-19
).
Step 3
Type the number of the Access Control List to be configured (1 through 99) and press
Enter.
Note that there is no default for this parameter.
Step 4
Begin adding entries to the selected list.
Indicate whether this entry is permitted access or denied access.
•
To permit access press
Enter
.
•
To deny access type
n
and press
Enter
.
Does this entry permit access? [yes]:
Step 5
Type the IP address to be added to this list, and press
Enter.
Type “
any
” and press
Enter
to include any IP address in the ACL.
Note that there is no default for this parameter.
Enter IP address or the word ‘any’ to denote any IP address:
Step 6
If you entered a specific IP address, enter the wildcard bits to define a range of IP addresses and
press
Enter
. (See
Entry Formats
(on page
5-13
).)
To define an individual IP address, type
0.0.0.0
and press
Enter
.
There is no default for this parameter.
Enter wildcard bits:
Step 7
The maximum number of entries in an ACL is 20.
If the “any” option was used, no other IP addresses may be added to the list.
•
To add more entries, type
y
and press
Enter
Would you like to add another entry to this list? [no]:
y
Enter up to 20 entries as described in step 5 and step 6.
When all entries have been added, press
Enter
Would you like to add another entry to this list? [no]:
Step 8
When all entries are added to one list, you are asked whether you would like to create another
ACL. You may define up to 99 ACLs.
