Troubleshooting
Using the NSS3000 LCD Panel
Cisco Small Business NSS3000 Series Network Storage System Administration Guide
97
A
The various states of the Error LED indicate that the disk drive is in an error
condition:
•
Solid
Red
: The disk drive is in a failed state.
•
Blinking
Red
: The disk drive is predicated to fail (via S.M.A.R.T.). We
recommend that you replace the disk drive to avoid the loss of data.
•
Off
: The drive is OK.
Off
: There is either no UPS attached to the NSS or the UPS function has been
disabled in the System Power page in the configuration interface.
On
: A UPS is attached to the NSS and the UPS function is enabled in the System
Power page in the configuration interface.
For more information about the UPS, see
”Configuring the System for UPS
Using the NSS3000 LCD Panel
The LCD panel on the front of the chassis lets you view various aspects of the
system such as the status of the configured RAIDs, volumes, the status of the
bootup, and so on. To step through the available options, press the
Display
button.
Each time you press the
Display
button, the next screen appears. Because of the
screen space limitations within many of the available screens, the information
appears on multiple pages.
For example, the
Home
screen has two pages (page 1 shows the hostname and IP,
and the second page shows the hostname and netmask). When you display a
screen, the first page appears. Subsequent pages appear after a few seconds and
continue to automatically scroll through the pages until you press the
Display
button.
The LCD panel displays these screen options:
•
Bootup Screen
: During the bootup of the NSS, the LCD panel displays its
progress.
•
Home Screen
: Displays the current hostname, IP address, and netmask of
the system.
•
System Alerts
: Displays the system alerts (two per page) in order from
most recent to the oldest. Fordetailed information about the system alerts,
see
