Configuring your Storage
Deleting an Array
Cisco Small Business NSS3000 Series Network Storage System Administration Guide
11
4
STEP 3
In the
RAID Arrays
table, click
Edit
for the applicable RAID array.
The
RAID Device Configuration
page appears.
All available disk drives appear in the listing.
STEP 4
Click
Add
to add the disk drive to the array.
•
If the disk drive is added to a functional array, the disk drive becomes a hot
spare.
•
If the disk drive is added to a degraded array, the RAID array is rebuilt. While
the rebuild continues, you can still use the array. After the rebuild process
completes, the disk becomes part of the redundant storage. You can
monitor the progress of the rebuild through the
System Status
page.
Deleting an Array
You can remove an existing array and release the disks used in the array back into
available storage. Deleting an array also deletes any existing data on the array
(including the volumes, shares, and quotas). If you delete an array that contains the
volume that is used as the location of your users’ Home Directories, you must
assign a new volume as the
Home Directory
location.
