Setting up End-User Access
Integrating Groups from an Active Directory, NTv4, or NIS Domain
Cisco Small Business NSS3000 Series Network Storage System Administration Guide
11
5
The
Edit Group
page appears.
STEP 4
Set up the
Users in Group
list as required. (The single angled bracket "<" or ">"
moves the selection in the direction of the bracket. The double angled bracket "<<"
or ">>" moves the entire list in the direction of the bracket.)
STEP 5
Click
Update
.
Integrating Groups from an Active Directory, NTv4, or
NIS Domain
When the NSS is joined to an Active Directory, NTv4, or NIS domain, domain
groups only appear on the
Shares
page (they do not appear in the list of
configured groups). Group membership for imported domain groups are read-only.
The naming conventions use the NetBIOS format with the domain name as a prefix
of the group name. For example, "DOMAINNAME\GroupName"
NOTE
Set up your User and Group ID ranges before you join the NSS to an ADS, NTv4, or
NIS domain. After you join the NSS to a domain, do not make changes to the range
as this might lead to an ID collision.
