D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
98
Cisco TelePresence MX200 G2 and MX300 G2
Administrator Guide
Security Audit Server Port
The audit logs are sent to a syslog server. Define the port of the syslog server that the
system shall send its audit logs to. This setting is only relevant when Security Audit Server
PortAssignment is set to Manual.
Requires user role: AUDIT
Default value: 514
Value space: Integer (0..65535)
Set the audit server port.
Security Audit Server PortAssignment
The audit logs are sent to a syslog server. You can define how the port number of the
external syslog server will be assigned. This setting is only relevant when Security Audit
Logging Mode is set to External or ExternalSecure. To see which port number is used you
can check the Security Audit Server Port status. Navigate to Configuration > System status
on the web interface or; if on a command line interface, run the command xStatus Security
Audit Server Port.
Requires user role: AUDIT
Default value: Auto
Value space: Auto/Manual
Auto: Will use UDP port number 514 when the Security Audit Logging Mode is set to
External. Will use TCP port number 6514 when the Security Audit Logging Mode is set to
ExternalSecure.
Manual: Will use the port value defined in the Security Audit Server Port setting.
Security Session InactivityTimeout
Define how long the system will accept inactivity from the user before he is automatically
logged out.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..10000)
Set the inactivity timeout (seconds); or select 0 when inactivity should not enforce
automatic logout.
Security Session ShowLastLogon
When logging in to the system using SSH or Telnet you will see the UserId, time and date of
the last session that did a successful login.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
On: Show information about the last session.
Off: Do not show information about the last session.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings
