manualshive.com logo in svg

Cisco MX200 G2, Руководство администратора

Поделиться
Скачать
Cisco MX200 G2 Скачать руководство пользователя страница 12

D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.  

www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved. 

12

Cisco TelePresence MX200 G2 and MX300 G2

Administrator Guide

Features and benefits

•  Easy to install – one piece plus floor stand, table stand (only 

MX200 G2), wheel base, or wall mount brackets (VESA 

mount).

•  Registers with Cisco Unified Communications Manager (UCM) 

and Cisco TelePresence Video Communication Server (VCS).

•  MX200 G2: Cisco TelePresence Precision camera with pan, 

tilt, and 5x zoom.

MX300 G2: Cisco TelePresence Precision camera with pan, 

tilt, and 8x zoom.

•  MX200 G2: High-quality 42 inch LCD display with 1920×1080 

resolution (1080p60) and 16:9 aspect ratio.

MX300 G2: High-quality 55 inch LCD display with 1920×1080 

resolution (1080p60) and 16:9 aspect ratio.

•  Two front speakers that provide superior audio quality. 

•  Integrated microphone, and support for two external Cisco 

TelePresence Table Microphone 20.

•  10 inch Cisco TelePresence Touch 10 user interface that 

offers simple control.

•  Standards-based.

•  Support for H.323 and Session Initiation Protocol (SIP) calls 

with bandwidth up to 6 Mbps point-to-point.

•  Support for video resolutions up to 1080p60.

•  Support for high-definition multimedia and presentation 

sharing at 1080p30 resolution.

•  Support for the dual display feature that allows another screen 

to be added for content sharing.

•  Support for the 

one-button-to-push

 feature for starting 

scheduled meetings.

•  Embedded MultiSite conferencing option that allows up 

to three additional participants (individual transcoding, no 

external bridge).

•  Natively supported by Cisco UCM version 8.6.2 and later.

MX300 G2

MX200 G2

Cisco TelePresence® MX200 G2 and MX300 G2 are part of the 

second generation of MX Series multipurpose endpoints.

MX200 G2 and MX300 G2 blend aesthetics, functionality and 

ease of use. 1080p60 high-definition (HD) performance and 

new features such as dual display and an embedded four-way 

MultiSite conferenceing option deliver more power and flexibility. 

The Cisco TelePresence Touch 10 user interface offers a larger 

screen size and a user-friendly experience.

MX200 G2 and MX300 G2 systems are easy to install, so you can 

quickly transform any meeting space into a telepresence-enabled 

team room. 

MX200 G2 and MX300 G2 can meet your needs whether you are 

just getting started with video communications or are planning to 

video-enable your entire organization.

MX200 G2 and MX300 G2 at a glance

(page 1 of 3)

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices

Introduction

Содержание MX200 G2














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды