manualshive.com logo in svg

Cisco IE 4000, Руководство по настройке программного обеспечения

Cisco IE 4000 - мощный промышленный коммутатор с поддержкой многофункциональных приложений. Вы можете загрузить бесплатно Руководство по аппаратной установке на нашем сайте. Получите детальное руководство для установки оборудования и настройки. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

23

   

Configuring Interfaces

Understanding Interface Types

If granting power would exceed the system power budget, the switch denies power, ensures that power to the port 
is turned off, generates a syslog message, and updates the LEDs. After power has been denied, the switch 
periodically rechecks the power budget and continues to attempt to grant the request for power.

If a device being powered by the switch is then connected to wall power, the switch might continue to power the 
device. The switch might continue to report that it is still powering the device whether the device is being powered 
by the switch or receiving power from an AC power source.

If a powered device is removed, the switch automatically detects the disconnect and removes power from the port. 
You can connect a nonpowered device without damaging it.

You can specify the maximum wattage that is allowed on the port. If the IEEE class maximum wattage of the powered 
device is greater than the configured maximum value, the switch does not provide power to the port. If the switch 
powers a powered device, but the powered device later requests through CDP messages more than the configured 
maximum value, the switch removes power to the port. The power that was allocated to the powered device is 
reclaimed into the global power budget. If you do not specify a wattage, the switch delivers the maximum value. Use 
the 

auto

 setting on any PoE port. The auto mode is the default setting.

static

—The switch pre-allocates power to the port (even when no powered device is connected) and guarantees that 

power will be available for the port. The switch allocates the port configured maximum wattage, and the amount is 
never adjusted through the IEEE class or by CDP messages from the powered device. Because power is 
pre-allocated, any powered device that uses less than or equal to the maximum wattage is guaranteed to be 
powered when it is connected to the static port. The port no longer participates in the first-come, first-served model.

However, if the powered-device IEEE class is greater than the maximum wattage, the switch does not supply power 
to it. If the switch learns through CDP messages that the powered device needs more than the maximum wattage, 
the powered device is shutdown.

If you do not specify a wattage, the switch pre-allocates the maximum value. The switch powers the port only if it 
discovers a powered device. Use the 

static

 setting on a high-priority interface.

never

—The switch disables powered-device detection and never powers the PoE port even if an unpowered device 

is connected. Use this mode only when you want to make sure power is never applied to a PoE-capable port, making 
the port a data-only port.

For information on configuring a PoE port, see 

Configuring a Power Management Mode on a PoE Port, page 36

.

Power Monitoring and Power Policing

When policing of the real-time power consumption is enabled, the switch takes action when a powered device consumes 
more power than the maximum amount allocated, also referred to as the 

cutoff-power value

. 

When PoE is enabled, the switch senses the real-time power consumption of the powered device. The switch monitors 
the real-time power consumption of the connected powered device; this is called 

power monitoring

 or 

power sensing

. 

The switch also polices the power usage with the 

power policing 

feature.

Power monitoring is backward-compatible with Cisco intelligent power management and CDP-based power 
consumption. It works with these features to ensure that the PoE port can supply power to the powered device. For more 
information about these PoE features, see 

Supported Protocols and Standards, page 21

.

The switch senses the real-time power consumption of the connected device as follows:

1.

The switch monitors the real-time power consumption on individual ports.

2.

The switch records the power consumption, including peak power usage. The switch reports the information through 
the CISCO-POWER-ETHERNET-EXT-MIB.

Содержание IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IE 4000

D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manual preview
AirPlus XtremeG Ethernet-to-Wireless Bridge...
Бренд: D-Link Страницы: 31
Allied Telesis AT-9424Ts/XP AC Datasheet preview
AT-9424Ts/XP AC
Бренд: Allied Telesis Страницы: 3
KEMP Technologies LoadMaster 1500 Installation And Configuration Manual preview
LoadMaster 1500
Бренд: KEMP Technologies Страницы: 71
US Robotics USR8700 User Manual preview
USR8700
Бренд: US Robotics Страницы: 156
Macsense MIH-108 User Manual preview
MIH-108
Бренд: Macsense Страницы: 39
Ubiquiti AmpliFi AFi-G Quick Start Manual preview
AmpliFi AFi-G
Бренд: Ubiquiti Страницы: 20
AMG Systems AMG9240-C User Manual preview
AMG9240-C
Бренд: AMG Systems Страницы: 2
CyberTAN WR214C User Manual preview
WR214C
Бренд: CyberTAN Страницы: 67
Asante IntraCore 6524 User Manual preview
IntraCore 6524
Бренд: Asante Страницы: 150
Hanwha Techwin Wisenet XRN-6410RB2-24TB User Manual preview
Wisenet XRN-6410RB2-24TB
Бренд: Hanwha Techwin Страницы: 124
H3C SecPath F1070 Manual preview
SecPath F1070
Бренд: H3C Страницы: 68
EMC VNX5300 Block Hardware Information Manual preview
VNX5300 Block
Бренд: EMC Страницы: 88
ZyXEL Communications Prestige 643 User Manual preview
Prestige 643
Бренд: ZyXEL Communications Страницы: 191
Alcatel-Lucent Broadband 700 MHz Brochure preview
Broadband 700 MHz
Бренд: Alcatel-Lucent Страницы: 8
Synology DiskStation Series Upgrade Installation Instructions preview
DiskStation Series
Бренд: Synology Страницы: 6
Teltonika RUT955 User Manual preview
RUT955
Бренд: Teltonika Страницы: 12
National Instruments FIELD POINT Installation Manual preview
FIELD POINT
Бренд: National Instruments Страницы: 4
Billion BiPAC 645 Quick Start Manual preview
BiPAC 645
Бренд: Billion Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды