Cisco IE 4000, Руководство по настройке программного обеспечения

Страница: 426 / 1066

422
Configuring IP Source Guard
Configuration Examples for IP Source Guard
Enabling IPSG for Static Hosts: Examples
This example shows how to enable IPSG with static hosts on a port:
Switch(config)# ip device tracking
Switch(config)# ip device tracking max 10
Switch(config-if)# ip verify source tracking port-security
This example shows how to enable IPSG for static hosts with IP filters on a Layer 2 access port and to verify the valid IP
bindings on the interface Gi0/3:
Switch#
configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# ip device tracking
Switch(config)#
interface gigabitethernet 0/3
Switch(config-if)# switchport mode access
Switch(config-if)# switchport access vlan 10
Switch(config-if)#
ip device tracking maximum 5
Switch(config-if)# ip verify source tracking
Switch(config-if)# end
Switch# show ip verify source
Interface Filter-type Filter-mode IP-address Mac-address Vlan
--------- ----------- ----------- --------------- ----------------- ----
Gi0/3 ip trk active 40.1.1.24 10
Gi0/3 ip trk active 40.1.1.20 10
Gi0/3 ip trk active 40.1.1.21 10
This example shows how to enable IPSG for static hosts with IP-MAC filters on a Layer 2 access port, to verify the valid
IP-MAC bindings on the interface Gi0/3, and to verify that the number of bindings on this interface has reached the
maximum:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# ip device tracking
Switch(config)# interface gigabitethernet 0/3
Switch(config-if)#
switchport mode access
Switch(config-if)# switchport access vlan 1
Switch(config-if)# ip device tracking maximum 5
Switch(config-if)#
switchport port-security
Switch(config-if)# switchport port-security maximum 5
Switch(config-if)# ip verify source tracking port-security
Switch(config-if)#
end
Switch# show ip verify source
Interface Filter-type Filter-mode IP-address Mac-address Vlan
--------- ----------- ----------- --------------- ----------------- ----
Gi0/3 ip-mac trk active 40.1.1.24 00:00:00:00:03:04 1
Gi0/3 ip-mac trk active 40.1.1.20 00:00:00:00:03:05 1
Gi0/3 ip-mac trk active 40.1.1.21 00:00:00:00:03:06 1
Gi0/3 ip-mac trk active 40.1.1.22 00:00:00:00:03:07 1
Gi0/3 ip-mac trk active 40.1.1.23 00:00:00:00:03:08 1
Displaying IP or MAC Binding Entries: Examples
This example displays all IP or MAC binding entries for all interfaces. The CLI displays all active as well as inactive entries.
When a host is learned on a interface, the new entry is marked as active. When the same host is disconnected from that
interface and connected to a different interface, a new IP or MAC binding entry displays as active as soon as the host is
detected. The old entry for this host on the previous interface is marked as INACTIVE.
Switch# show ip device tracking all
IP Device Tracking = Enabled
IP Device Tracking Probe Count = 3