Cisco IE 4000, Руководство по настройке программного обеспечения

Страница: 619 / 1066

615
Configuring QoS
Configuring QoS
5. conform-action [ drop | set-cos-transmit
{ cos_value | [ cos | dscp | precedence ] [ table
table-map name ]} | set-dscp-transmit
{ dscp_value | [ cos | dscp | precedence ]
[ table table-map name ]} | set-prec-transmit
{ precedence_value | [ cos | dscp |
precedence ] [ table table-map name ]} |
set-qos-transmit qos-group_value |
transmit ]
| exceed-action [ drop | set-cos-transmit
{ cos_value | [ cos | dscp | precedence ] [ table
table-map name ]} | set-dscp-transmit
{ dscp_value | [ cos | dscp | precedence ]
[ table table-map name ]} | set-prec-transmit
{ precedence_value | [ cos | dscp |
precedence ] [ table table-map name ]} |
set-qos-transmit qos-group_value |
transmit ]
| violate- action [ drop | set-cos-transmit
{ cos_value | [ cos | dscp | precedence ] [ table
table-map name ]} | set-dscp-transmit
{ dscp_value | [ cos | dscp | precedence ]
[ table table-map name ]} | set-prec-transmit
{ precedence_value | [ cos | dscp |
precedence ] [ table table-map name ]} |
set-qos-transmit qos-group_value |
transmit ]
(Optional) Enter the action to be taken on packets, depending on
whether or not they conform to the CIR and PIR.

(Optional) For conform-action , specify the action to perform
on packets that conform to the CIR and PIR. The default is
transmit .

(Optional) For exceed-action , specify the action to perform on
packets that conform to the PIR but not the CIR. The default is
drop .

(Optional) For violate-action , specify the action to perform on
packets that exceed the PIR. The default is drop .

(Optional) For action , specify one of these actions to perform
on the packets:
— drop —Drop the packet.
Note: If the conform action is set to drop , the exceed and violate
actions are automatically set to drop . If the exceed action is set to
drop , the violate action is automatically set to drop .
— set-cos-transmit cos-value —Enter a new CoS value to be
assigned to the packet, and send the packet. The range is
from 0 to 7.
— set-dscp-transmit dscp-value —Enter a new IP DSCP
value to be assigned to the packet, and send the packet.
The range is from 0 to 63. You can also enter a mnemonic
name for a commonly used value.
— set-prec-transmit cos-value —Enter a new IP precedence
value to be assigned to the packet, and send the packet.
The range is from 0 to 7.
— set-qos-transmit qos-group-value —Identify a qos-group
to be used at egress to specify packets. The range is from
0 to 99.
— transmit —Send the packet without altering it.
Note: You can enter a single conform-action as part of the
command string following the police command. You can also press
Enter after the
police command to enter policy-map class police
configuration mode, where you can enter multiple actions. In
policy-map class police configuration mode, you must enter an
action to take.
6. exit Return to policy-map configuration mode.
7. exit Return to global configuration mode.
8. interface interface-id Enter interface configuration mode for the interface to which you
want to attach the policy.
9. service-policy input policy-map-name Attach the policy map (created in Step 2) to the ingress interface.
Command Purpose