manualshive.com logo in svg

Cisco IE 4000, Руководство по настройке программного обеспечения

Cisco IE 4000 - мощный промышленный коммутатор с поддержкой многофункциональных приложений. Вы можете загрузить бесплатно Руководство по аппаратной установке на нашем сайте. Получите детальное руководство для установки оборудования и настройки. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

1059

 

Using an SD Card

SD Card Operation

write

 command—Saves the running configuration. If the system boots from an SD card and you run a 

write

 

command, the system saves the running configuration to the SD card, if the card is still installed. If the SD card has 
been removed, the system saves the running configuration to the internal flash memory and displays this message:

WARNING: The SD flash is not present.

The running-config is saved to the on-board flash.

NOTE: This warning message is displayed only once.

If the system boots from the internal flash memory and you then insert an SD card and run the 

write

 command, the 

system saves the running configuration to the internal flash memory.

boot

 command—Lets you change the system boot parameters. 

If the system boots from an SD card and you run a 

boot

 command, the following behavior applies:

—

If the SD card is installed and the system boot path or configuration file path points to the SD card, the system 
boot path or configuration file path is saved to the SD card

—

If the SD card is installed and the system boot path or configuration file path points to the internal flash memory, 
the system boot path or configuration file path is saved to the internal flash memory

—

If the SD card has been removed and the system boot path or configuration file path points to the SD card, the 
system boot path or configuration file path is not saved and the following message displays:

WARNING: The BOOT/config file path points to the

SD flash card and the SD flash card is not present.

The environment variable(s) is not saved.

NOTE: This warning message is displayed only once.

If the system boots from the internal flash memory and you then insert an SD card and run the 

boot

 command, the 

following behavior applies:

—

If the system boot path or configuration file path points to the internal flash memory, the system boot path or 
configuration file path is saved to the internal flash memory

—

If the system boot path or configuration file path points to the SD card, the system boot path or configuration 
file path is saved to the SD card and the following message is displayed:

WARNING: The BOOT/config file path points to the

SD flash card. The environment variable(s) is

saved onto the SD flash card.

NOTE: This warning message is displayed only once.

—

If the SD card has been removed and the system boot path or configuration file path points to the SD card, the 
system boot path or configuration file path is not saved and the following message is displayed:

WARNING: The BOOT/config file path points to the

SD flash card and the SD flash card is not present.

The environment variable(s) is not saved.

NOTE: This warning message is displayed only once.

sync

 command—Copies the IOS image directory (which includes the IOS image file, FPGA image files, Device 

Manager files, and Profinet/CIP configuration files), the config.text IOS configuration file, the vlan.dat VLAN 
configuration file, and IOS boot parameters from the internal flash memory to the SD card or from the SD card to the 
internal flash memory. This command verifies that the IOS image is appropriate for the switch model and that enough 
destination flash memory is present, and aborts the sync process if a potential problem is detected. The 

sync

 

command obtains the source IOS image directory path and source IOS configuration files path from the IOS boot 

Содержание IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IE 4000

H3C MSR 20-20 Supplementary Manual preview
MSR 20-20
Бренд: H3C Страницы: 6
3Com OfficeConnect 3CP4144 How To Set Up preview
OfficeConnect 3CP4144
Бренд: 3Com Страницы: 4
3Com OfficeConnect 3CP4144 Release Note preview
OfficeConnect 3CP4144
Бренд: 3Com Страницы: 2
H3C MSR 20-20 User Manual preview
MSR 20-20
Бренд: H3C Страницы: 60
H3C MSR 20 Series Manual preview
MSR 20 Series
Бренд: H3C Страницы: 149
3Com 3C13636 Installation Manual preview
3C13636
Бренд: 3Com Страницы: 27
3Com OfficeConnect 3C19500 User Manual preview
OfficeConnect 3C19500
Бренд: 3Com Страницы: 52
H3C RA100 Installation Manual preview
RA100
Бренд: H3C Страницы: 34
Planet GSW-1602SF User Manual preview
GSW-1602SF
Бренд: Planet Страницы: 20
EMCIS LISN User'S Operating Manual preview
LISN
Бренд: EMCIS Страницы: 14
Allied Telesis AT-8550/SP Series Installation Manual preview
AT-8550/SP Series
Бренд: Allied Telesis Страницы: 114
Belkin AC 1600 DB User Manual preview
AC 1600 DB
Бренд: Belkin Страницы: 57
Westermo Ibex-RT-330-HV User Manual preview
Ibex-RT-330-HV
Бренд: Westermo Страницы: 34
Global Sun GL-241101 User Manual preview
GL-241101
Бренд: Global Sun Страницы: 39
Top RAMS1000 User Manual preview
RAMS1000
Бренд: Top Страницы: 21
2N Telekomunikace ATEUS STARGATE User Manual preview
ATEUS STARGATE
Бренд: 2N Telekomunikace Страницы: 67
Keysight Technologies U3024AH10 User'S And Service Manual preview
U3024AH10
Бренд: Keysight Technologies Страницы: 106
EXAGATE SYSGuard 6001 Quick Installation Manual preview
SYSGuard 6001
Бренд: EXAGATE Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды