manualshive.com logo in svg

Cisco IE 4000, Руководство по настройке программного обеспечения

Cisco IE 4000 - мощный промышленный коммутатор с поддержкой многофункциональных приложений. Вы можете загрузить бесплатно Руководство по аппаратной установке на нашем сайте. Получите детальное руководство для установки оборудования и настройки. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

258

Configuring Smartports Macros

 

How to Configure Smartports Macros

cisco-cg-hmi

Use this interface configuration macro for increased network security and reliability when 
connecting a desktop device, such as a PC, to a switch port. This macro is optimized for utility 
deployments.

no-cisco-cg-hmi

Use the 

no

 form of this interface configuration macro to delete the macro from the switch.

cisco-cg-ied

Use this interface configuration macro when connecting the switch to an IED.

no-cisco-cg-ied

Use the 

no

 form of this interface configuration macro to delete the macro from the switch.

cisco-ie-phone

 Use this interface configuration macro when connecting a desktop device such as a PC with a 
Cisco IP Phone to a switch port. This macro is an extension of the 

cisco-desktop

  macro and 

provides the same security and resiliency features, but with the addition of dedicated voice 
VLANs to ensure proper treatment of delay-sensitive voice traffic.

no-cisco-ie-phone

Use the 

no

 form of this interface configuration macro to delete the macro from the switch.

cisco-cg-router

Use this interface configuration macro when connecting the switch and a WAN router. This macro 
is optimized for utility deployments.

no-cisco-cg-router

Use the 

no

 form of this interface configuration macro to delete the macro from the switch.

cisco-cg-switch

Use this interface configuration macro when connecting a ring of switches. This macro is 
optimized for utility deployments.

no-cisco-cg-switch

Use the 

no

 form of this interface configuration macro to delete the macro from the switch.

cisco-cg-wireless

Use this interface configuration macro when connecting the switch and a wireless access point. 
This macro is optimized for utility deployments.

no-cisco-cg-wireless

Use the 

no

 form of this interface configuration macro to delete the macro from the switch.

cisco-desktop

Use this interface configuration macro for increased network security and reliability when 
connecting a desktop device, such as a PC, to a switch port. This macro is optimized for utility 
deployments.

no-cisco-desktop

Use the 

no

 form of this interface configuration macro to delete the macro from the interface.

cisco-ie-none

The None Smartport is used to clear all Smartport configurations from the port. 

cisco-ethernetip 

Use this interface configuration macro when connecting the switch to an EtherNet IP device.

Note: 

You must first apply the 

cisco-ie-global

 macro for the 

cisco-ethernetip

 macro to work 

properly.

cisco-ie-global

Use this global configuration macro to configure the switch settings for the industrial Ethernet 
environment. This macro is automatically applied when you use Express Setup to initially 
configure the switch.

Note: 

You must first apply the 

cisco-ie-global

 macro for the 

cisco-ethernetip

 macro to work 

properly.

cisco-ie-desktop

Use this interface configuration macro for increased network security and reliability when 
connecting a desktop device, such as a PC, to a switch port. This macro is optimized for 
industrial automation traffic.

cisco-ie-phone 

Use this interface configuration macro when connecting a desktop device such as a PC with a 
Cisco IP Phone to a switch port. This macro is an extension of the 

cisco-ie-desktop

 macro and 

provides the same security and resiliency features, but with the addition of dedicated voice 
VLANs to ensure proper treatment of delay-sensitive voice traffic. This macro is optimized for 
industrial automation traffic.

Table 31

Default Smartports Macros (continued)

Macro Name

1

Description

Global Configuration Macros

Содержание IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IE 4000

C&H Technologies EM405-8 Manual preview
EM405-8
Бренд: C&H Technologies Страницы: 46
Patton electronics 2888 Getting Started Manual preview
2888
Бренд: Patton electronics Страницы: 51
Patton electronics IPLink 2802 Specifications preview
IPLink 2802
Бренд: Patton electronics Страницы: 2
Lanner NCA-1525 User Manual preview
NCA-1525
Бренд: Lanner Страницы: 78
B+B SmartWorx Airborne M2M ABDN-er-DP55 Series User Manual preview
Airborne M2M ABDN-er-DP55 Series
Бренд: B+B SmartWorx Страницы: 120
Edgewater Networks EdgeMarc 4300T Installation Manual preview
EdgeMarc 4300T
Бренд: Edgewater Networks Страницы: 23
Extreme Networks ACC-BKT-AX-BEAM Accessories Manual preview
ACC-BKT-AX-BEAM
Бренд: Extreme Networks Страницы: 35
Ubiquiti EdgePoint EP-R8 Quick Start Manual preview
EdgePoint EP-R8
Бренд: Ubiquiti Страницы: 22
EINHELL TC-RO 850 Original Operating Instructions preview
TC-RO 850
Бренд: EINHELL Страницы: 32
Hama 53178 Instruction Manual preview
53178
Бренд: Hama Страницы: 45
OWC MINISTACK STX User Manual preview
MINISTACK STX
Бренд: OWC Страницы: 8
MikroTik Wireless Wire Quick Manual preview
Wireless Wire
Бренд: MikroTik Страницы: 25
Lancom AirLancer MC-54 Manual preview
AirLancer MC-54
Бренд: Lancom Страницы: 47
D-Link DIR-803 User Manual preview
DIR-803
Бренд: D-Link Страницы: 159
D-Link DIR-810L User Manual preview
DIR-810L
Бренд: D-Link Страницы: 169
D-Link DIR-813 Quick Installation Manual preview
DIR-813
Бренд: D-Link Страницы: 32
Panasonic WV-SC385 Specifications preview
WV-SC385
Бренд: Panasonic Страницы: 2
Panasonic WV-SC384 Specifications preview
WV-SC384
Бренд: Panasonic Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды