manualshive.com logo in svg

Cisco IE 4000, Руководство по настройке программного обеспечения

Cisco IE 4000 - мощный промышленный коммутатор с поддержкой многофункциональных приложений. Вы можете загрузить бесплатно Руководство по аппаратной установке на нашем сайте. Получите детальное руководство для установки оборудования и настройки. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

302

Configuring VTP

 

Information About Configuring VTP

Turn off VTP pruning by making all VLANs on the trunk of the switch upstream to the VTP transparent switch pruning 
ineligible.

To configure VTP pruning on an interface, use the 

switchport trunk pruning vlan

 interface configuration command. VTP 

pruning operates when an interface is trunking. You can set VLAN pruning-eligibility, whether or not VTP pruning is 
enabled for the VTP domain, whether or not any given VLAN exists, and whether or not the interface is currently trunking.

Default VTP Settings

VTP Configuration Guidelines

You use the 

vtp

 global configuration command to set the VTP password, the version, the VTP filename, the interface 

providing updated VTP information, the domain name, and the mode, and to disable or enable pruning. The VTP 
information is saved in the VTP VLAN database. When VTP mode is transparent, the VTP domain name and mode are 
also saved in the switch running configuration file, and you can save it in the switch startup configuration file by entering 
the 

copy running-config startup-config

 privileged EXEC command. You must use this command if you want to save 

VTP mode as transparent if the switch resets.

When you save VTP information in the switch startup configuration file and restart the switch, the configuration is selected 
as follows:

If the VTP mode is transparent in both the startup configuration and the VLAN database and the VTP domain name 
from the VLAN database matches that in the startup configuration file, the VLAN database is ignored (cleared). The 
VTP and VLAN configurations in the startup configuration file are used. The VLAN database revision number remains 
unchanged in the VLAN database. 

If the VTP mode or the domain name in the startup configuration do not match the VLAN database, the domain name 
and the VTP mode and configuration for the first 1005 VLANs use the VLAN database information. 

Domain Names

When configuring VTP for the first time, you must always assign a domain name. You must configure all switches in the 
VTP domain with the same domain name. Switches in VTP transparent mode do not exchange VTP messages with other 
switches, and you do not need to configure a VTP domain name for them.

Note: 

If NVRAM and DRAM storage is sufficient, all switches in a VTP domain should be in VTP server mode.

Caution: 

Do not configure a VTP domain if all switches are operating in VTP client mode. If you configure the domain, 

it is impossible to make changes to the VLAN configuration of that domain. Make sure that you configure at least 
one switch in the VTP domain for VTP server mode.

Feature

Default Setting

VTP domain name

Null.

VTP mode (VTP version 1 and version 2)

Server.

VTP mode (VTP version 3)

The mode is the same as the mode in VTP version 1 or 2 before 
conversion to version 3.

VTP version 

Version 1.

MST database mode

Transparent.

VTP version 3 server type

Secondary.

VTP password

None.

VTP pruning

Disabled.

Содержание IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IE 4000

B+B SmartWorx CR10 v2 Start Manual preview
CR10 v2
Бренд: B+B SmartWorx Страницы: 4
Cambium Networks PTP 550 Series Quick Start Manual preview
PTP 550 Series
Бренд: Cambium Networks Страницы: 68
Cambium Networks PTP 820S Installation Manual preview
PTP 820S
Бренд: Cambium Networks Страницы: 110
ZyXEL Communications EOC350 Series Quick Start Manual preview
EOC350 Series
Бренд: ZyXEL Communications Страницы: 2
Dahua NVS0X04DH Quick Start Manual preview
NVS0X04DH
Бренд: Dahua Страницы: 24
SAGEMCOM SE681 WiMAX User Manual preview
SE681 WiMAX
Бренд: SAGEMCOM Страницы: 75
H3C NSQ1GT48EA0 Manual preview
NSQ1GT48EA0
Бренд: H3C Страницы: 3
UNICORECOMM UM620N User Manual preview
UM620N
Бренд: UNICORECOMM Страницы: 19
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Бренд: Paradyne Страницы: 108
Trend Micro R610 Series Quick Start Manual preview
R610 Series
Бренд: Trend Micro Страницы: 2
Teldat H2 RAIL Installation Manual preview
H2 RAIL
Бренд: Teldat Страницы: 47
WatchNet ENM-04 POE Quick Connection Manual preview
ENM-04 POE
Бренд: WatchNet Страницы: 2
Vivotek ND9312 User Manual preview
ND9312
Бренд: Vivotek Страницы: 185
ADTRAN NetVanta 1224R Specifications preview
NetVanta 1224R
Бренд: ADTRAN Страницы: 4
TP-Link TL-R470T Plus Configuration Manual preview
TL-R470T Plus
Бренд: TP-Link Страницы: 182
Adeunis RF ARF8264AAA Quick Start Manual preview
ARF8264AAA
Бренд: Adeunis RF Страницы: 9
Billionton GMIWLGRL2 User Manual preview
GMIWLGRL2
Бренд: Billionton Страницы: 26
CYP DCT-35 Operation Manual preview
DCT-35
Бренд: CYP Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды