Cisco IE 4000, Руководство по настройке программного обеспечения

Страница: 17 / 1066

13
Using the Command-Line Interface
How to Use the CLI to Configure Features
The range is from 0 to 256.
Beginning in line configuration mode, enter this command to configure the number of command lines the switch records
for all sessions on a particular line:
Switch(config-line)# history
[
size number-of-lines
]
The range is from 0 to 256.
Recalling Commands
To recall commands from the history buffer, perform one of the actions listed in Table 4 on page 13 . These actions are
optional.
Disabling the Command History Feature
The command history feature is automatically enabled. You can disable it for the current terminal session or for the
command line. These procedures are optional.
To disable the feature during the current terminal session, enter the terminal no history privileged EXEC command.
To disable command history for the line, enter the no history line configuration command.
Using Editing Features
This section describes the editing features that can help you manipulate the command line. It contains these sections:

Enabling and Disabling Editing Features, page 13 (optional)

Editing Commands Through Keystrokes, page 14 (optional)

Editing Command Lines That Wrap, page 15 (optional)
Enabling and Disabling Editing Features
Although enhanced editing mode is automatically enabled, you can disable it, reenable it, or configure a specific line to
have enhanced editing. These procedures are optional.
To globally disable enhanced editing mode, enter this command in line configuration mode:
Table 4 Recalling Commands
Action
1
Result
Press Ctrl-P or the up arrow key. Recall commands in the history buffer, beginning with the most recent command.
Repeat the key sequence to recall successively older commands.
Press Ctrl-N or the down arrow key. Return to more recent commands in the history buffer after recalling commands
with
Ctrl-P or the up arrow key. Repeat the key sequence to recall successively
more recent commands.
show history While in privileged EXEC mode, list the last several commands that you just
entered. The number of commands that appear is controlled by the setting of the
terminal history global configuration command and the history line configuration
command.
1. The arrow keys function only on ANSI-compatible terminals such as VT100s.