• The table on the lower part of the information chart contains device
identification and real-time RSSI readings for other stationary and
mobile radios that are part of the network.
Manipulating the FM-QUADRO view
FM-QUADRO can be manipulated and edited to make any network easy
to view.
To change the overall position of the network view, click any blank part of
the view, and drag the view to any position on the screen.
To very quickly zoom into or out of the network view, click any blank part
of the view, and scroll back and forth with the mouse wheel.
• The view will snap between four pre-determined zoom settings.
To apply fine zoom adjustment to the network view, do the steps that
follow:
1.
Click the
Zoom
icon on the upper right part of the FM-QUADRO
view (upper icon, below).
• The Zoom slider and buttons will be shown (above).
2.
Click the
+
button to zoom into the view, or click the
–
button to
zoom out of the view. Alternatively, click-and-drag the zoom slider
to adjust the zoom level.
Changing the relative position of device icons
All Fluidmesh devices represented by icons or tooltips can be placed in
any position on the FM-QUADRO view. To move any icon or tooltip, do the
steps that follow:
1.
Click the
Edit Mode
icon on the upper right part of the FM-
QUADRO view (below).
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 62 of 138
