•
Passthrough
: If the device is a trackside-mounted Fluidity
device, this parameter can be used to simultaneously
activate RADIUS device authentication, and enable
RADIUS passthrough (communication between RADIUS-
authenticated vehicle-mounted devices and non-
authenticated trackside-mounted devices).
4.
Enter the IP address or host name of the RADIUS server in the
IP
address / hostname
field.
5.
By default, the RADIUS port number is
1812
. Do not change the
port number unless there is a specific need to do so.
6.
Enter the RADIUS access password in the
Secret
field. To read
the password as it is typed, check the
show
check-box.
7.
By default, the RADIUS inactivity
Expiration (s)
period is 28 800
seconds (8 hours). Do not change the expiration period unless
there is a specific need to do so.
8.
Choose the data authentication method by clicking the
Authentication Method
drop-down and clicking the correct
option. Available options are:
•
MSCHAPV2
(Microsoft Challenge-Handshake
Authentication Protocol V2)
•
MD5
(Hash function producing a 128-bit hash value)
•
GTC
(Generic Token Card)
•
TTLS
(Tunneled Transport Layer Security)
•
PEAP
(Protected Extensible Authentication Protocol)
9.
Enter the personal username for access to the RADIUS server in
the
Username
field.
10. Enter the personal password for access to the RADIUS server in
the
Password
field. To read the password as it is typed, check
the
show
check-box.
11. Available
Inner Authentication Methods
depend on which
Authentication Method
has been chosen. If applicable, choose an
inner authentication method by clicking the
Inner Authentication
Method
drop-down and clicking the correct option. Available
options are shown in the following table:
Table 6. Available inner authentication methods (per
authentication methods)
Authentication
Method
Available Inner Authentication Methods
MSCHAPV2
None
MD5
None
GTC
None
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 82 of 138
