5.
Save the SNMP settings by clicking the
Save
button.
Alternatively, clear the settings by clicking the
Reset
button.
Using SNMP v3
To change the unit's SNMP mode to
v3
and configure the unit accordingly,
do the following steps:
1.
Click the
SNMP mode
drop-down, and click the
v3
option.
• The
SNMP
v3 settings dialog will be shown (
).
Figure 36. SNMP dialog (v3 selected)
2.
Enter an SNMP v3 user name in the
SNMP v3 username:
field.
IMPORTANT
The same SNMP v3 user name must be set for all
Fluidmesh units in the wireless network.
3.
To change the current SNMP v3 password, enter a new password
in the
SNMP v3 password:
field. The default password
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 79 of 138
