Figure 41. Configurator GUI (FLUIDITY dialog for
gateway devices)
2.
Fluidmesh radio transceivers are shipped from the factory with
Fluidity functionality disabled. Enable Fluidity functionality by
checking the
Fluidity
check-box.
IMPORTANT
The
Unit Role:
drop-down is set to
Infrastructure
mode, and cannot be changed.
3.
The network type must be set in accordance with the general
network architecture. Select the correct network type designation
for the unit by clicking the
Network Type:
drop-down and clicking
the correct option from the list below:
•
Flat:
Choose this setting if the wireless mesh network and
the infrastructure network both belong to a single layer-2
broadcast domain.
•
Multiple Subnets:
Choose this setting if the wireless mesh
network and the infrastructure network are organized as
separate layer-3 routing domains.
4.
Save the Fluidity settings by clicking the
Save
button.
Alternatively, clear the settings by clicking the
Reset
button.
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 89 of 138
