Rebooting the unit
The
reboot
window contains controls that allow you to reboot the Cisco
FM1000 Gateway (in other words, to re-start the unit's operating system).
To reboot the unit, do the following steps:
1.
Click the
-reboot
link under
MANAGEMENT SETTINGS
in the
left-hand settings menu.
• The unit reboot dialog will be shown (
Figure 55. Configurator GUI (unit reboot dialog)
2.
Reboot the unit by clicking the
YES
link. Alternatively, abort the
reboot by clicking the
NO
link.
• If the
YES
link was clicked, the unit will reboot.
6.8.8. Logging out
If clicked, the logout option logs the current user off the unit, and out of the
Configurator interface.
•
To log out, click the
-logout
link under
MANAGEMENT
SETTINGS
in the left-hand settings menu.
• You will be logged off the unit and out of the Configurator
interface with no further prompting.
• The web browser will show the
Authentication Required
dialog (
). If needed, use the dialog to
log in again.
Figure 56. Web browser (Authentication Required
dialog)
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 106 of 138
