Chapter 5 Setting Up Devices—CiscoWorks 1105/1130/1130-19
Setting Up IOS Access Points
5-16
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Step 9
The WDS access point must also register and authenticate itself to the WDS to
participate in the SWAN hierarchy; therefore, the WDS AP is also an
infrastructure AP. To configure the WDS access point as an infrastructure access
point:
wlccp ap username
username password password
Note
To configure authentication for wireless clients, see the relevant AP
documentation.
Using a WLSE Configuration Template to Configure WDS Access Points
You can use the WLSE to configure one or more WDS access points.
The major configuration steps are:
•
Create a configuration template to set up AAA servers and the WDS.
•
Apply the configuration template to the appropriate access points by running
a configuration job.
To configure WDS access points by using a WLSE configuration template:
Step 1
Log in to the WLSE web interface.
Step 2
Select
Configure > Templates.
a.
Enter a template name, selecting IOS as the template type.
b.
Click
Create New
.
Step 3
Enter the AAA servers for LEAP authenticating the infrastructure access points
and the WLSE to the WDS, and the AAA servers for authenticating wireless client
devices:
a.
Select
Security > Server Manager
.
b.
In the Corporate Servers section, for each server, enter the IP address, select
RADIUS, and enter the shared secret.
c.
Click
Save
.
Step 4
Select
Wireless Services > WDS
to configure the WDS parameters.
