A-13
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Appendix A Installing Software—CiscoWorks 1105/1130/1130-19
Upgrade Methods
To reimage your WLSE, perform the following steps:
Step 1
Connect a console to the WLSE’s serial/console port:
•
For the WLSE 1105, use the serial port on the front panel; do not use the serial
port on the back panel for a console.
•
For the WLSE 1130 or WLSE 1130-19, use the serial port on the back panel.
Step 2
Log in as the
admin
user, and enter the password created when the WLSE was
configured.
Step 3
Put the Recovery CD in the WLSE’s CD drive (on the front panel).
Step 4
Enter the following command. The WLSE will reboot.
reload
Step 5
At the following prompt, enter
yes
to start the Recovery CD:
Do you wish to continue (Yes/[No]/Rescue)
yes
Caution
If you do not want to re-image the WLSE, enter
rescue
. For more information
about the rescue image, see the
User Guide for the CiscoWorks Wireless LAN
Solution Engine, Release 2.7
.
Step 6
When the WLSE ejects the Recovery CD, remove it.
Step 7
At the following prompt, enter
yes
:
Do you wish to reload and start the install?(yes/[no])
yes
Result: The WLSE is re-imaged and reboots.
Step 8
When the Recovery CD ejects from the CD drive, remove it.
When the installation completes, the login prompt appears on the console.
Step 9
Restore the backup.
For information about restoring backups, see the
User Guide for the CiscoWorks
Wireless LAN Solution Engine, Release 2.7
or the online help.
