Chapter 6 Setting Up Discovery and Device Management—CiscoWorks 1105/1130/1130-19
Adding AAA Servers to the WLSE
6-6
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Adding AAA Servers to the WLSE
Use the following procedure to add information about all AAA servers to be
monitored by the WLSE. For information about configuring an AAA server for
monitoring, see
Setting Up AAA Servers, page 5-25
.
Step 1
Select
Devices >
Discover > AAA Server
.
Step 2
Select the server type: EAP-MD5, LEAP, PEAP, or RADIUS.
Step 3
Complete the following:
Step 4
Click
Save
.
Step 5
Repeat Steps 2-4 for each AAA server you want to add.
For more information on AAA servers, see the WLSE online help.
Text Box
Description
Server Name
Hostname or IP address of an AAA server to be added.
Note
Depending on how your network is set up, the AAA
server can be a Cisco Secure Access Control Server or
a Cisco Access Registrar RADIUS server.
Server Port
Port on the server used for authentication; use port 1645.
Username
Client username that you entered on the AAA server.
Password
Client password that you entered on the AAA server.
Secret
Shared secret key that you entered on the AAA server.
