6-3
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Chapter 6 Setting Up Discovery and Device Management—CiscoWorks 1105/1130/1130-19
Adding Device Credentials to the WLSE
Step 2
To add an entry:
a.
Enter data in the individual text boxes: IP address, Read Community,
Timeout, SNMP Retries, and Write Community.
b.
Click
Add
to add the community string to the list.
Result: The community string appears in the list of entries.
Step 3
To modify an entry:
a.
Select the entry in the list of entries.
Result: The individual text boxes are populated with the data from the entry.
b.
Change the desired fields in the individual text boxes.
c.
Click
Modify
.
Note
The IP address field of an existing entry cannot be changed.
Step 4
To delete an entry:
a.
Select the entry in the list of entries.
b.
Click
Delete
.
Note
The default entry cannot be deleted.
Step 5
Click
Save
to apply your changes.
Enter HTTP Credentials for Non-IOS Access Points
HTTP credentials are required for downloading configuration files to non-IOS
access points and for uploading configuration from such access points. The same
password must be set on each access point, as described in
Table 5-1 on page 5-2
.
You can enter as many usernames and passwords as necessary.
To enter HTTP usernames and passwords:
Step 1
Select
Devices > Discover > Device Credentials > HTTP User/Password
.
