Chapter 5 Setting Up Devices—CiscoWorks 1105/1130/1130-19
Setting Up IOS Access Points
5-8
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Note
If you do not wish to use CDP, you can add all access points as seeds or
import devices. For more information, see
Discovering Devices, page 6-7
.
Step 3
You can use either Telnet or SSH (secure shell protocol) to push configuration
templates to IOS access points. To use templates to configure IOS access points,
you must configure either Telnet or SSH or both.
•
To enable and configure SSH (secure shell protocol), enter the following:
1.
Select
SERVICES > Telnet/SSH
.
2.
Enable
Secure Shell
.
3.
Enter a System Name.
4.
Enter a Domain Name (for example, cisco.com).
5.
(Optional) Enter the RSA key size.
6.
(Optional) Enter the Authentication Timeout.
7.
(Optional) Enter Authentication Retries.
8.
Click
Apply
.
•
To enable and configure Telnet:
1.
Select
SERVICES > Telnet/SSH
.
2.
Enable
Telnet
.
3.
(Optional) Enable
Teletype
.
4.
Enter the number of Columns.
5.
Enter the number of Lines.
6.
Click
Apply
.
Step 4
To enable SNMP:
a.
Select
Services > SNMP
.
b.
After Simple Network Management Protocol (SNMP), select
Enabled
.
c.
Enter the System Name (sysName), System Location (sysLocation), and
System Contact (sysContact).
d.
Click
Apply
.
