Cisco Catalyst 3560-X Series, Руководство по настройке программного обеспечения

Страница: 171 / 1538

1-39
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Chapter 1 Managing Switch Stacks
Troubleshooting Stacks
This is now the port status:
Switch# show switch stack-ports summary
Switch#/ Stack Neighbor Cable Link Link Sync # In
Port# Port Length OK Active OK Changes Loopback
Status To LinkOK
-------- ------ -------- -------- ---- ------ ---- --------- --------
1/1 OK 2 50 cm Yes Yes Yes 1 No
1/2 Absent None No cable No No No 2 No
2/1 Down None 50 cm No No No 2 No
2/2 OK 1 50 cm Yes Yes Yes 1 No
Only one end of the cable connects to a stack port, Port 1 on Switch 2.
•
The Stack Port Status value for Port 2 on Switch 1 is Absent , and the value for Port 1 on Switch 2 is
Down .
• The Cable Length value is No cable .
Diagnosing the problem:
• Verify the cable connection for Port 2 on Switch 1.
•
Port 2 on Switch 1 has a port or cable problem if
– The In Loopback value is Yes .
or
– The Link OK , Link Active , or Sync OK value is No .
Fixing a Bad Connection Between Stack Ports
Stack cables connect all members. Port 2 on Switch 1 connects to Port 1 on Switch 2.
This is the port status:
Switch# show switch stack-ports summary
Switch#/ Stack Neighbor Cable Link Link Sync # In
Port# Port Length OK Active OK Changes Loopback
Status To LinkOK
-------- ------ -------- -------- ---- ------ ---- --------- --------
1/1 OK 2 50 cm Yes Yes Yes 1 No
1/2 Down None 50 cm No No No 2 No
2/1 Down None 50 cm No No No 2 No
2/2 OK 1 50 cm Yes Yes Yes 1 No
Diagnosing the problem:
• The Stack Port Status value is Down .
•
Link OK , Link Active , and Sync OK values are No .
• The Cable Length value is 50 cm . The switch detects and correctly identifies the cable.
The connection between Port 2 on Switch 1 and Port 1 on Switch 2 is unreliable on at least one of the
connector pins.