Cisco Catalyst 3560-X Series, Руководство по настройке программного обеспечения

Страница: 1461 / 1538

1-39
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Appendix 1 Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with Software Images
The upload feature should be used only if the web management pages associated with the embedded
device manager have been installed with the existing image.
Beginning in privileged EXEC mode, follow these steps to upload an image to an RCP server:
The archive upload-sw privileged EXEC command builds an image file on the server by uploading these
files in order: info, the Cisco IOS image, and the web management files. After these files are uploaded,
the upload algorithm creates the file format.
Caution
For the download and upload algorithms to operate properly, do not rename image names.
Copying an Image File from One Stack Member to Another
For switch stacks, the archive download-sw and archive upload-sw privileged EXEC commands can
be used only through the stack master. Software images downloaded to the stack master are
automatically downloaded to the rest of the stack members.
To upgrade a switch that has an incompatible software image, use the archive copy-sw privileged EXEC
command to copy the software image from an existing stack member to the one that has incompatible
software. That switch automatically reloads and joins the stack as a fully functioning member.
Command Purpose
Step 1
Verify that the RCP server is properly configured by
referring to the
“Preparing to Download or Upload an Image
File By Using RCP” section on page 1-36 .
Step 2
Log into the switch through the console port, the Ethernet
management port, or a Telnet session.
Step 3 configure terminal Enter global configuration mode.
This step is required only if you override the default remote
username (see Steps 4 and 5).
Step 4
ip rcmd remote-username username (Optional) Specify the remote username.
Step 5 end Return to privileged EXEC mode.
Step 6 archive upload-sw
rcp:
[[[ // [ username @ ] location ] / directory ] / image-na
me .tar ]
Upload the currently running switch image to the RCP
server.
• For // username, s pecify the username; for the RCP copy
request to execute, define an account on the network
server for the remote username. For more information,
see the
“Preparing to Download or Upload an Image
File By Using RCP” section on page 1-36 .
•
For @ location , specify the IP address of the RCP server.
• For / directory ] / image-name .tar , specify the directory
(optional) and the name of the software image to be
uploaded. Directory and image names are case sensitive.
•
The image-name .tar is the name of software image to be
stored on the server.