Cisco Catalyst 3560-X Series, Руководство по настройке программного обеспечения

Страница: 1430 / 1538

1-8
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Appendix 1 Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with the Flash File System
This example shows how to create a file. This command writes the contents of the new-configs directory
on the local flash device to a file named saved. on the TFTP server at 172.20.10.30:
Switch# archive /create tftp:172.20.10.30/saved. flash:/new-configs
Note
The following examples show Catalyst 3750-E switch outputs. The outputs would be similar for the
Catalyst 3750-X and 3560-X.
This example shows how to display the contents of a switch file that is in flash memory.
Switch# archive /table flash:.
info (219 bytes)
/ (directory)
/html/ (directory)
/html/foo.html (0 bytes)
/.bin (610856 bytes)
/info (219 bytes)
This example shows how to display only the /html directory and its contents:
Switch# archive /table flash: /html
/html
/html/ (directory)
/html/const.htm (556 bytes)
/html/xhome.htm (9373 bytes)
/html/menu.css (1654 bytes)
<output truncated>
This example shows how to extract the contents of a file located on the TFTP server at 172.20.10.30.
Switch# archive /xtract tftp:/172.20.10.30/saved. flash:/new-configs
Step 3
archive /xtract source-url
flash:/ file-url [ dir/file ...]
Extract a file into a directory on the flash file system.
For source-url , specify the source URL alias for the local file system. The
-filename . is the file from which to extract files. These options are supported:
• local flash file system syntax:
flash:
•
FTP syntax:
ftp: [[ // username [ : password ] @ location ] / directory ] / -filename .
• RCP syntax:
rcp: [[ // username @ location ] / directory ] / -filename .
•
TFTP syntax:
tftp: [[ // location ] / directory ] / -filename .
For flash:/ file-url [ dir/file ...], specify the location on the local flash file system
from which the file is extracted. Use the dir/file ... option to specify a list of files
or directories within the file to be extracted. If none are specified, all files and
directories are extracted.
Step 4
more [ /ascii | /binary | /ebcdic ]
file-url
Display the contents of any readable file, including a file on a remote file
system.
Command Purpose