1-20
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Chapter 1 Overview
Network Configuration Examples
Network Configuration Examples
This section provides network configuration concepts and includes examples of using the switch to
create dedicated network segments and interconnecting the segments through Gigabit Ethernet and
10-Gigabit Ethernet connections.
•
“Design Concepts for Using the Switch” section on page 1-20
•
“Small to Medium-Sized Network” section on page 1-23
Design Concepts for Using the Switch
As your network users compete for network bandwidth, it takes longer to send and receive data. When
you configure your network, consider the bandwidth required by your network users and the relative
priority of the network applications that they use.
describes what can cause network performance to degrade and how you can configure your
network to increase the bandwidth available to your network users.
Table 1-1
Increasing Network Performance
Network Demands
Suggested Design Methods
Too many users on a single network
segment and a growing number of
users accessing the Internet
•
Create smaller network segments so that fewer users share the bandwidth, and use
VLANs and IP subnets to place the network resources in the same logical network
as the users who access those resources most.
•
Use full-duplex operation between the switch and its connected workstations.
•
Increased power of new PCs,
workstations, and servers
•
High bandwidth demand from
networked applications (such as
e-mail with large attached files)
and from bandwidth-intensive
applications (such as
multimedia)
•
Connect global resources—such as servers and routers to which the network users
require equal access—directly to the high-speed switch ports so that they have
their own high-speed segment.
•
Use the EtherChannel feature between the switch and its connected servers and
routers.
