38-76
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Chapter 38 Configuring IP Unicast Routing
Configuring ISO CLNS Routing
To return to the default settings, use the
no
forms of the commands.
Monitoring and Maintaining ISO IGRP and IS-IS
You can remove all contents of a CLNS cache or remove information for a particular neighbor or route.
You can display specific CLNS or IS-IS statistics, such as the contents of routing tables, caches, and
databases. You can also display information about specific interfaces, filters, or neighbors.
lists the privileged EXEC commands for clearing and displaying ISO CLNS and IS-IS
routing. For explanations of the display fields, see the
Cisco IOS Apollo Domain, Banyan VINES,
DECnet, ISO CLNS and XNS Command Reference, Release 12.2,
use the Cisco IOS command reference
master index, or search online.
Step 11
isis password
password
[
level-1
|
level-2
]
(Optional) Configure the authentication password for an interface. By
default, authentication is disabled. Specifying Level 1 or Level 2 enables
the password only for Level 1 or Level 2 routing, respectively. If you do not
specify a level, the default is Level 1 and Level 2.
Step 12
end
Return to privileged EXEC mode.
Step 13
show clns interface
interface-id
Verify your entries.
Step 14
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
Table 38-13
ISO CLNS and IS-IS Clear and Show Commands
Command
Purpose
clear clns cache
Clear and reinitialize the CLNS routing cache.
clear clns es-neighbors
Remove end system (ES) neighbor information from the adjacency database.
clear clns is-neighbors
Remove intermediate system (IS) neighbor information from the adjacency
database.
clear clns neighbors
Remove CLNS neighbor information from the adjacency database.
clear clns route
Remove dynamically derived CLNS routing information.
show clns
Display information about the CLNS network.
show clns cache
Display the entries in the CLNS routing cache.
show clns es-neighbors
Display ES neighbor entries, including the associated areas.
show
clns
filter-expr
Display
filter
expressions.
show clns filter-set
Display
filter
sets.
show clns interface
[
interface-id
]
Display the CLNS-specific or ES-IS information about each interface.
show clns neighbor
Display information about IS-IS neighbors.
show clns protocol
List the protocol-specific information for each IS-IS or ISO IGRP routing
process in this router.
show clns route
Display all the destinations to which this router knows how to route CLNS
packets.
show clns traffic
Display information about the CLNS packets this router has seen.
show ip route isis
Display the current state of the ISIS IP routing table.