4-11
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Chapter 4 Configuring Cisco IOS Configuration Engine
Configuring Cisco IOS Agents
Step 13
cns
id
interface num
{
dns-reverse
|
ipaddress
|
mac-address
} [
event
] [
image
]
or
cns
id
{
hardware-serial
|
hostname
|
string
string
|
udi
} [
event
] [
image
]
(Optional) Set the unique EventID or ConfigID used by the
Configuration Engine.
•
For
interface num
, enter the type of interface–for
example, ethernet, group-async, loopback, or
virtual-template. This setting specifies from which
interface the IP or MAC address should be retrieved to
define the unique ID.
•
For {
dns-reverse
|
ipaddress
|
mac-address
}, enter
dns-reverse
to retrieve the hostname and assign it as
the unique ID, enter
ipaddress
to use the IP address,
or enter
mac-address
to use the MAC address as the
unique ID.
•
(Optional) Enter
event
to set the ID to be the event-id
value used to identify the switch.
•
(Optional) Enter
image
to set the ID to be the image-id
value used to identify the switch.
Note
If both the
event
and
image
keywords are omitted,
the image-id value is used to identify the switch.
•
For {
hardware-serial
|
hostname| string
string
|
udi
}, enter
hardware-serial
to set the switch serial
number as the unique ID, enter
hostname
(the default)
to select the switch hostname as the unique ID, enter
an arbitrary text string for
string
string
as the unique
ID, or enter
udi
to set the unique device identifier
(UDI) as the unique ID.
Command
Purpose