4-13
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Chapter 4 Configuring Cisco IOS Configuration Engine
Configuring Cisco IOS Agents
This example shows how to configure an initial configuration on a remote switch when the switch IP
address is known. The Configuration Engine IP address is 172.28.129.22.
Switch(config)#
cns template connect template-dhcp
Switch(config-tmpl-conn)#
cli ip address dhcp
Switch(config-tmpl-conn)#
exit
Switch(config)#
cns template connect ip-route
Switch(config-tmpl-conn)#
cli ip route 0.0.0.0 0.0.0.0 ${next-hop}
Switch(config-tmpl-conn)#
exit
Switch(config)#
cns connect dhcp
Switch(config-cns-conn)#
discover interface gigabitethernet
Switch(config-cns-conn)#
template
template-dhcp
Switch(config-cns-conn)#
template
ip-route
Switch(config-cns-conn)#
exit
Switch(config)#
hostname RemoteSwitch
RemoteSwitch(config)#
ip route 172.28.129.22 255.255.255.255 11.11.11.1
RemoteSwitch(config)#
cns id ethernet 0 ipaddress
RemoteSwitch(config)#
cns config initial 172.28.129.22 no-persist
Enabling a Partial Configuration
Beginning in privileged EXEC mode, follow these steps to enable the Cisco IOS agent and to initiate a
partial configuration on the switch:
To disable the Cisco IOS agent, use the
no cns config partial
{
ip-address | hostname
} global
configuration command. To cancel a partial configuration, use the
cns config cancel
privileged EXEC
command.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
cns config partial
{
ip-address | hostname
}
[
port-number
] [
source
ip-address
]
Enable the configuration agent, and initiate a partial
configuration.
•
For {
ip-address
|
hostname
}, enter the IP address or
the hostname of the configuration server.
•
(Optional) For
port-number
, enter the port number of
the configuration server. The default port number is
80.
•
(Optional) Enter
source
ip-address
to use for the
source IP address.
Note
Though visible in the command-line help string,
the
encrypt
keyword is not supported.
Step 3
end
Return to privileged EXEC mode.
Step 4
show cns config stats
or
show cns config outstanding
Verify information about the configuration agent.
Step 5
show running-config
Verify your entries.
Step 6
copy running-config startup-config
(Optional) Save your entries in the configuration file.
