C-7
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Appendix C Unsupported Commands in Cisco IOS Release 12.2(52)SE
IP Unicast Routing
The
show ip mpacket
commands are supported but are only useful for packets received at the switch
CPU. If the route is hardware-switched, the command has no effect because the CPU does not receive
the packet and cannot display it.
show ip pim vc
[
group-address
|
name
] [
type number
]
show ip rtp header-compression
[
type number
] [
detail
]
Unsupported Global Configuration Commands
ip multicast-routing vrf
vrf-name
ip pim accept-rp
{
address
|
auto-rp
} [
group-access-list-number
]
ip pim message-interval
seconds
Unsupported Interface Configuration Commands
frame-relay ip rtp header-compression
[
active
|
passive
]
frame-relay map ip
ip-address dlci
[
broadcast
]
compress
frame-relay map ip
ip-address dlci
rtp header-compression
[
active
|
passive
]
ip igmp helper-address
ip-address
ip multicast helper-map
{
group-address
|
broadcast
} {
broadcast-address
|
multicast-address
}
extended-access-list-number
ip multicast rate-limit
{
in
|
out
} [
video
|
whiteboard
] [
group-list
access-list
] [
source-list
access-list
]
kbps
ip multicast ttl-threshold
ttl-value
(instead, use the
ip multicast boundary
access-list-number
interface configuration command)
ip multicast use-functional
ip pim minimum-vc-rate
pps
ip pim multipoint-signalling
ip pim nbma-mode
ip pim vc-count
number
ip rtp compression-connections
number
ip rtp header-compression
[
passive
]
IP Unicast Routing
Unsupported Privileged EXEC or User EXEC Commands
clear ip accounting
[
checkpoint
]
clear ip bgp
address
flap-statistics
clear ip bgp prefix-list
